Hansgrohe Focus Kitchen Faucet Review: Worth It? (November 2026)
Buy the Hansgrohe Focus if you want a high arc pull-down with a magnetic spray head and a tough PVD stainless finish. Most kitchens are better served by the Kraus KPF-2820SFS, which adds a full 360° swivel and a spot-free finish.
On this page (8 sections)
The Hansgrohe Focus is a well-built high arc pull-down for buyers who want magnetic docking and a scratch-resistant stainless finish. The swivel stops at 150°, though, so it reaches less far around a wide sink than the top alternatives here.
For most kitchens, the Kraus KPF-2820SFS is the better buy. It adds a full 360° swivel, a spot-free finish and a slightly higher flow for a similar spot in the market.
This review of the Hansgrohe Focus kitchen faucet covers the specs, the install, the care routine and the real trade-offs, so you can decide which one fits your sink.
The Hansgrohe Focus at a glance
The Focus is a single-hole pull-down faucet in a stainless optic finish, built around a brass body. It measures 17 in high with a 13.3 in reach, so it clears tall pots while staying close enough to the basin for everyday washing.
hansgrohe Focus Stainless Steel High Arc Kitchen: Best for a magnetic spray head
- 150° swivel spout
- Pull-down spray head with MagFit magnetic docking
- Laminar and shower spray modes
- PVD stainless steel optic finish
- 1.75 gpm flow rate
A high arc pull-down with a magnetic spray head and a scratch-resistant PVD finish. The 150° swivel limits reach toward the back of a wide sink.
Pros
- Magnetic docking centers the spray head
- Two spray modes switched at the head
- PVD stainless optic finish resists scratches
- Lifetime warranty for the original owner
Cons
- 150° swivel reaches less than a full-turn spout
- Fewer finish choices than some rivals
- Higher price tier than basic pull-downs
Its score of 6.8 reflects solid materials and a smart spray head, held back by the shorter swivel and a price tier above basic pull-downs. The two rivals below score higher for most buyers.
Our kitchen faucet brands comparison shows where Hansgrohe sits against Moen and Kraus on features and warranty.
The Focus belongs to a wider family. Hansgrohe builds the Focus range with straight, clear lines to sit well in modern kitchens, and offers finishes in chrome or the optional scratch-resistant stainless-steel look.
This model is the high arc pull-down with a hand spray. Its footprint is modest for a tall faucet, at 3.5 in wide across the base, so it leaves counter space free around the sink.
Who should buy the Hansgrohe Focus?
Buy the Focus if magnetic docking is the feature you care about most. The MagFit holder pulls the spray head back to the center of the spout, so it sits straight instead of dangling.
That matters in a busy kitchen where the head gets pulled out dozens of times a day.
It also suits anyone who wants a PVD stainless finish. Hansgrohe says the coating is particularly resistant and scratch resistant, which helps on a faucet that takes daily contact from pots and hands.
The side-mounted brass lever is easy to reach without leaning over a hot pan, and the ergonomic handle shape in the Focus range is built for comfortable one-hand use.
Skip it if your sink is wide or set into a corner run. The 150° swivel is enough for a compact basin, but it won't swing as far as a full-turn spout when you need to rinse the far corner of a large farmhouse sink.
If reach matters more than docking, look at the alternatives below. It also isn't the faucet for a kitchen built around matte black or rubbed bronze hardware, since this model comes in one color.
The specs that matter in daily use
The numbers that change your day-to-day experience are flow rate, spout height, swivel range and spray modes. The Focus runs at 1.75 gpm, sits 17 in tall and offers two sprays switched at the head.
| Spec | Hansgrohe Focus |
|---|---|
| Flow rate | 1.75 gpm |
| Height | 17 in |
| Spout swivel | 150° |
| Spray modes | Laminar and shower |
| Spray head docking | MagFit magnetic |
| Finish | Stainless Steel Optic (PVD) |
| Handle placement | Side |
| Holes | 1 |
| Hose length | 12 in |
| Warranty | Lifetime, original owner |
The laminar spray fills pots quickly and cleanly, while the shower spray is gentle enough for fruit and vegetables. Switching between them happens at the head, so you don't have to reach back to the base mid-rinse.
Hansgrohe describes the wide shower spray as the mode for washing vegetables, salad, fish and meat thoroughly, while the normal spray fills pots and pans accurately and quickly. That split is more useful than it sounds, because the two jobs want different water patterns.
The 17 in height gives room under the spout for stock pots. The 13.3 in depth figure describes how far the faucet body projects, so measure both your cabinet clearance and the space behind the sink before ordering.
A tall faucet plus a tall pot can crowd the space above the sink.
The brass handle sits on the side and takes one hole. The mounting hole diameter is 1 in.
A 12 in hose set and the connection hoses come in the box. If you want the full picture on how long a faucet like this should serve you, read how long do kitchen faucets last.
Setting up the Hansgrohe Focus
Installation runs through one mounting hole with flexible 3/8-inch hoses that connect to standard angle valves. That keeps the under-sink work simpler than a three-hole setup with separate sprayer lines.
If your counter already has three holes from an older faucet, you will need a deck plate, which this kit does not include.
Hansgrohe recommends a licensed plumber install the product. If you plan to do it yourself, shut off the water and confirm the valves under the sink hold before you disconnect the old faucet.
A worn valve is the most common reason a simple swap turns into a plumbing call. Clear the old putty or gasket from the hole and check that the counter edge around it is dry and sound.
Set the faucet in place, hand-tighten the fittings and check for leaks under pressure before you put everything back in the cabinet. Then run both sprays to clear any debris from the lines.
The faucet weighs 6.5 pounds, so it is light enough to hold in place with one hand while you tighten the mounting nut from below.
Allow time to sort the hose routing so the pull-down returns smoothly. A kinked hose stops the spray head from retracting all the way, even with a magnetic holder.
Leave the loop of hose loose under the cabinet and keep it away from the garbage disposal and any sharp cabinet edges.
Cleaning and caring for the PVD finish
Wipe the faucet with a soft cloth and mild soap, then dry it, and the PVD stainless optic surface keeps its look. The coating resists scratches from daily use, but it still collects water spots if left wet.
Skip abrasive pads and scouring powders. They can dull the coating over time and cancel out the scratch resistance you paid for.
A microfiber cloth and a drop of dish soap handle most marks. Dry the spout and handle after cleaning so hard water doesn't leave a film on the stainless look.
The pull-down head has soft rubber nozzles that let you wipe away mineral buildup. Do that when you notice spray streams going crooked, and the two modes keep working cleanly.
Rub each nozzle with a finger or a damp cloth rather than poking at it with a pin.
Check the base and handle for loose fittings now and then. A small drip at the base usually means a seating issue rather than a failed valve, and catching it early saves cabinet damage.
Wipe under the base after heavy use to stop water pooling there.
The trade-offs to weigh first
The clearest trade-off is the 150° swivel. It covers a standard sink well, but a wide sink or a corner install leaves a gap you can't reach without leaning.
Buyers who rinse big pans across a broad basin will feel that limit every day.
The second is the swivel setup. Hansgrohe's Focus range offers spouts adjustable in three levels of 110°, 150° and 360°, but this model ships at 150°.
If you need the full swing, confirm which stop you have before buying rather than assuming it turns all the way.
The third is the finish choice. The stainless optic PVD look is tough, but the model here comes in one color.
A kitchen built around matte black or brushed gold hardware won't match it. The stainless look also shows water spots more than a spot-free coating does, so it asks for the drying habit covered above.
One more point to note is the warranty wording. Hansgrohe covers the faucet for as long as the original buyer owns both the product and the home where it was installed, and the coverage does not transfer.
It also excludes units bought from unauthorized sellers. That means where you buy matters as much as which model you pick.
None of these are faults. They're the reasons the Focus scores lower than the two faucets below for a typical kitchen.
The alternatives here
If the Focus doesn't fit your sink or your finish, the two faucets below cover the gaps. Both score higher, and each one wins on a different need.
Kraus KPF-2820SFS Pulldown (Spot Free Stainless)
The Kraus KPF-2820SFS is the best pick overall among these three. Its 360° swivel reaches every corner of a wide sink, and the Spot Free finish resists water spots and fingerprints so you clean it less often.
It runs at 1.8 gpm, the highest flow here, and offers aerated stream and powerful spray modes with easy-clean nozzles. The brass body and ceramic cartridge are durable parts for the price tier.
Its 16 5/8 in height is a touch shorter than the Focus, which helps under low cabinets. The spout height is 8 3/4 in and the reach is 8 7/8 in, so the faucet delivers water close to the basin.
A snap-on counterweight and a quick connect sprayer hose are in the box, and the pre-attached water lines save a step at install. The catch is that it's a single-hole install only.
Our roundup of Kraus kitchen faucet models shows how the Oletto line fits together.
Moen Arbor Pulldown (7594SRS)
The Moen Arbor is the best pick for faster pot filling. A Power Boost button boosts the stream for a quicker fill, and the Reflex system docks the spray head smoothly after each pull.
It flows at 1.5 gpm, the lowest of the three, so it uses less water over the same time. The Spot Resist Stainless finish shrugs off fingerprints and water spots.
Because it fits one or three holes with the included deck plate, it can replace a three-hole faucet without patching the counter. The kit includes the deck plate and flexible supply lines with 3/8 in compression fittings.
Its profile is transitional rather than strictly modern, with a slight flair at the handle and a curve in the spout, so it blends with more kitchen styles than the straight-lined Focus. Moen also states that its residential faucets comply with the Federal Safe Drinking Water Act and NSF 61 standards.
If you have a three-hole setup or you fill stock pots often, this is the one to shortlist. The Kohler kitchen faucet roundup is a good next stop if you're weighing more brands.
The verdict
The Hansgrohe Focus is worth buying if magnetic docking and a PVD stainless finish are your priorities, and your sink is compact enough for a 150° swivel. It's well made, easy to live with and backed by a lifetime warranty for the original owner.
This Hansgrohe Focus kitchen faucet review finds one clear limitation, and that's reach.
For most kitchens, choose the Kraus KPF-2820SFS instead. The full 360° swivel and spot-free finish make it the stronger everyday faucet, and it scores higher here.
Pick the Moen Arbor if you fill pots often or need a three-hole fit.
Match the faucet to your sink width and hole count first, then pick the spray head features you'll actually use. Those two choices decide more about daily satisfaction than the badge on the box.
Frequently asked questions
Is the Hansgrohe Focus faucet good quality?
The Focus has a brass body, a PVD stainless optic finish and a lifetime warranty for the original owner. Those are solid materials for the price tier.
The main limit is its 150° swivel, which reaches less far than a full-turn spout on a wide sink.
What is the flow rate of the Hansgrohe Focus kitchen faucet?
It runs at 1.75 gpm. That sits between the Moen Arbor at 1.5 gpm and the Kraus KPF-2820SFS at 1.8 gpm.
A higher flow fills pots faster, while a lower flow uses less water over the same time.
Does the Hansgrohe Focus spray head dock magnetically?
Yes. Hansgrohe uses a magnetic holder called MagFit, so the pull-down head settles back into the center of the spout without a manual push.
That keeps the head aligned and stops it from hanging loose over the sink.
Can I install the Hansgrohe Focus myself?
It uses one mounting hole and comes with flexible 3/8-inch connection hoses. Hansgrohe recommends a licensed plumber install it.
If you have replaced a kitchen faucet before and your shut-off valves are sound, the job is within reach for a careful DIYer.
How does the Hansgrohe Focus compare with the Kraus KPF-2820SFS?
The Kraus wins on reach and finish care, with a 360° swivel and a spot-free coating at a slightly higher score. Pick the Hansgrohe instead if the magnetic docking and PVD stainless look matter more to you than a full swivel.
What is the warranty on the Hansgrohe Focus?
Hansgrohe covers the Focus for as long as the original buyer owns both the faucet and the home where it was installed. The warranty does not transfer and does not cover units bought from unauthorized sellers, so buy from a seller Hansgrohe lists as authorized.
