Moen Wetherly Kitchen Faucet Review: Worth It? (November 2026)
The Moen Wetherly High Arc (87999SRS) is a solid pick for a classic two-hole sink if you want a separate side sprayer and a fingerprint-resistant finish. Its 7.5 score reflects a dated design for most modern kitchens, so the WEWE pull-down earns the better overall buy.
On this page (8 sections)
The Moen Wetherly High Arc (87999SRS) is a good fit for a classic two-hole sink where you want a separate side sprayer and a finish that shrugs off fingerprints. It scores 7.5 here, and most kitchens will be better served by a pull-down faucet with more spray modes.
Our Moen Wetherly kitchen faucet reviews look at the specs, the fit and the trade-offs so you can decide before you buy.
The Wetherly's charm is its traditional high arc and its dedicated side spray. The weak spot is that the design feels older next to pull-down faucets, which pack more function into the same footprint.
Buy it for the look and the two-hole fit, not for the latest features.
The Moen Wetherly at a glance
The Wetherly is a single-handle high-arc faucet with a separate side sprayer, finished in Spot Resist Stainless. It's built for sinks with two or four holes, and the 14-1/2 inch arc leaves room to fill big pots.
Moen fits it with a metal body and flexible supply lines with 3/8 inch compression fittings. The faucet weighs about 4.5 pounds.
It carries the Wetherly model name and the part number 87999SRS.
Moen Wetherly High Arc (87999SRS): Best for classic two-hole sinks
- 14-1/2 in high-arc spout
- 9 in spout reach
- Separate side sprayer
- Spot Resist Stainless finish
A traditional high-arc faucet with a separate side sprayer and Spot Resist Stainless finish. It fits two-hole sinks without a deckplate and four-hole sinks with one.
Pros
- Spot Resist Stainless resists fingerprints and water spots
- Separate side sprayer reaches sink corners
- Works in two-hole or four-hole sinks
- 14-1/2 in arc clears large pots
Cons
- Side sprayer needs its own hose hole
- No pull-down sprayer in the spout
- Traditional styling dates modern kitchens
The Spot Resist Stainless finish is the headline for anyone who hates wiping smudges. Moen says it resists fingerprints and water spots, which matters in a busy kitchen where the faucet gets grabbed all day.
The separate side sprayer adds reach for rinsing dishes and cleaning sink corners. That's a practical combo for a traditional or transitional kitchen, and the lever handle is easy to grab with wet hands.
The handle sits at the center of the base, between the spout and the sprayer. The design leans classic rather than modern, so it reads as a natural fit in a traditional or transitional kitchen rather than a minimalist one.
Who the Moen Wetherly suits
Buy the Wetherly if your sink has two holes and you want a classic look without adding a deckplate. The separate side sprayer gives you a second water outlet for rinsing, and the Spot Resist finish keeps the stainless bright with less wiping.
The separate sprayer keeps the spout itself simple and light, so the arc swings without a spray head adding weight to the end. That matters if you fill tall pots often, since a plain spout is easy to position over a wide pot rim.
Skip it if you have a one-hole sink or want modern pull-down function. A one-hole sink needs a single-hole faucet, and the Wetherly won't fit without drilling.
If you rinse a lot of dishes and want three spray modes in your hand, a pull-down faucet serves you better. The Wetherly is a style-first choice, so let your sink layout and your kitchen's look lead.
The specs that matter in daily use
The 14-1/2 inch height and 9 inch spout reach are the numbers to know before you buy. The high arc gives you room to fill stockpots and pitchers, and the 9 inch reach puts the stream over the middle of most sinks.
Measure the gap under your upper cabinets first, since the arc needs clearance to swing. A deep sink paired with a tall faucet can put the spout lower than expected, so check the height from the sink base, not just from the counter.
The 1.5 gpm flow rate is standard for kitchen faucets and keeps water use reasonable. The single lever handle controls temperature and flow with one hand, which helps when you're holding a dish in the other.
Moen builds the body in metal and includes flexible supply lines with 3/8 inch compression fittings, so the hookup is straightforward. The included deck plate and sprayer mean the box covers both the two-hole and four-hole paths.
The separate side sprayer needs its own hose connection and a hole in the sink or deckplate. That's fine on a four-hole sink, but it adds a step on a two-hole setup where the sprayer mounts on the deckplate.
The center-set lever placement means the handle sits between the spout and the sprayer, so check you have room to reach it. The sprayer's hose is the part to watch over time, since it flexes every time you pull it out.
Setting up the Wetherly in a two-hole or four-hole sink
Setup depends on your sink's hole count. A two-hole sink takes the faucet without the deckplate, while a four-hole sink uses the included deckplate plus the separate side sprayer.
On a two-hole sink, the sprayer mounts on the deckplate beside the faucet, so the plate carries both bases.
Start by checking your sink's holes and the space beneath it. The flexible supply lines with 3/8 inch compression fittings connect to standard shutoff valves.
Shut off the water, remove the old faucet and clean the sink deck before you set the new one. Feed the lines and the sprayer hose through their holes, then tighten the mounting hardware from below.
The deck-mounted design means the faucet sits on the sink or countertop, and the lever handle stays within easy reach once the base is set. If your sink has a fourth hole for a soap dispenser, the side sprayer can take that spot instead.
Test for leaks at the supply connections and the sprayer hose before you run the faucet. It's a deck-mount faucet, so there's no need to cut a larger opening, and the flexible lines give you some slack to work with under the sink.
Care and cleaning for the Spot Resist finish
The Spot Resist Stainless finish is the easiest part to maintain. Wipe it with a soft cloth and mild soap, then dry it to keep water spots from drying on the surface.
Moen's finish resists fingerprints and water spots, so you won't need special cleaners for everyday smudges.
The brushed stainless look also hides light marks better than a polished finish.
Avoid abrasive pads and harsh chemicals on the stainless. They can dull the brushed look and wear away the spot-resistant coating.
For the side sprayer, wipe the head and let water run through it now and then to keep the flow even. Mineral buildup on the spray holes is the usual cause of a weak spray, and a quick soak in vinegar handles it.
Drying after a wipe is what keeps water spots from forming in the first place.
Clean the aerator on the spout when the stream starts to sputter. Unscrew it, rinse the screen and soak it in vinegar if it's crusty.
A drop of silicone grease on the cartridge can quiet a squeak. Give the sprayer hose a look now and then for kinks or wear, and keep the spray head clear so the reach stays useful.
The trade-offs before you buy
The biggest trade-off is the older design. The Wetherly puts the sprayer on the sink deck instead of in the spout, so you have to reach for a separate handle when you rinse.
Pull-down faucets put the spray in your hand with one motion. That's a real difference when you're washing a sink full of dishes.
The separate sprayer also means a second hose under the sink, which adds one more connection to check for leaks.
The two-hole and four-hole requirement also limits where it fits. A one-hole sink needs drilling or a different faucet.
The 9 inch spout reach is fine for most sinks but won't cover a very wide basin at the corners, so the side sprayer earns its keep there. On a deep sink, the 14-1/2 inch arc gives good clearance, but the shorter reach means you may lean in more than you would with a longer spout.
The 1.5 gpm flow rate is standard, though some people prefer a higher flow for filling pots faster. And the traditional look won't suit a modern kitchen with matte black or minimalist fixtures.
For a matching Moen look with more function, our Moen Haelyn review covers a pull-down option.
Alternatives worth a look
The Wetherly has strong competition at its price and function level. These three faucets cover the main reasons you might look past it.
WEWE High-Arc Pull-Down Kitchen Faucet
The WEWE is the better overall buy for most kitchens. It has a 3-mode sprayer with stream, spray and pause, and a 360 degree swivel spout that reaches every corner of the sink.
The 20 inch pull-down hose retracts with a gravity ball, and the 304 stainless steel body and ceramic cartridge are built for daily use. It fits one or three holes.
At 1.8 gpm it flows a little faster than the Wetherly, and its 15.7 inch height clears tall pots. If you want more function in the same high-arc look, this is the one to get.
See our roundup of the best Kraus kitchen faucets if you're weighing more pull-down options.
Moen Adler Matte Black One-Handle High Arc
The Adler gives you Moen's newer pull-down design in matte black. It uses Power Clean spray, which Moen says provides 50 percent more spray power than its faucets without it.
The Reflex system docks the spray head smoothly. It's ADA compliant and Moen backs it with a limited lifetime warranty.
It fits one or three holes with the included deckplate. The 16 inch hose is shorter than the WEWE's 20 inch reach.
Pick it for a modern look with stronger spray and a well-known brand behind it. For a different brand in the same style, our guide to the best Kohler kitchen faucets has more.
Moen Align Kitchen Faucet
The Moen Align is another Moen option worth comparing if you like the brand and want a slimmer look. It's a popular choice for transitional kitchens that want a cleaner profile than the Wetherly's traditional curves.
Read the Moen Align kitchen faucet reviews to see how its specs stack up. If the Wetherly's styling feels too classic but you want to stay with Moen, the Align is the model to check.
The verdict on the Moen Wetherly
Buy the Wetherly if you have a two-hole or four-hole sink and want a classic high arc with a separate side sprayer and a fingerprint-resistant finish. The Spot Resist Stainless finish and the side sprayer do real work every day.
The metal body and the single lever handle keep daily use simple, and the 1.5 gpm flow rate meets current standards without waste.
Skip it if you want the latest pull-down function or a modern matte look. The WEWE pull-down is the better overall pick for most kitchens thanks to its three spray modes and swivel spout.
The Moen Adler is the pick if you want matte black and Moen's Power Clean spray. Check your hole count and cabinet clearance before you order, and the Wetherly will do its job for years in the kitchen that suits it.
Frequently asked questions
Is the Moen Wetherly faucet good quality?
Moen rates it for everyday kitchen use, and its metal body and Spot Resist Stainless finish hold up to daily cleaning. The 1.5 gpm flow rate meets current standards.
The main compromise is design, not build: a separate side sprayer and no pull-down head put it behind newer pull-down faucets.
Does the Moen Wetherly fit a one-hole sink?
No. It's built for two-hole or four-hole sinks.
A two-hole sink needs the faucet holes only; a four-hole sink uses the included deckplate plus the separate side sprayer.
Check your sink's hole count before you order, since a one-hole sink needs a single-hole faucet instead.
What finish does the Moen Wetherly come in?
This model, the 87999SRS, comes in Spot Resist Stainless. Moen says that finish resists fingerprints and water spots, which helps keep the faucet looking cleaner between wipedowns.
It's a brushed stainless look, so it pairs well with traditional and transitional kitchens.
How high is the Moen Wetherly faucet?
It stands about 14-1/2 inches high with a 9-inch spout reach. That clearance fits most under-cabinet spaces and lets you fill tall pots and pitchers, but measure the gap between your counter and upper cabinets first.
The high arc needs headroom to swing freely.
How does the Wetherly compare to a pull-down faucet?
The Wetherly uses a separate side sprayer, while pull-down faucets put the spray head on the spout itself. Pull-downs like the WEWE or the Moen Adler offer more spray modes and easier rinsing.
The Wetherly's advantage is its classic look and its fit for two-hole sinks that lack a deckplate.
